03 – Telescope-Type Boxes

0300 – Telescope-type box with 4-point glued base and lid

This consists of bottom and lid parts with grooves on the long sides. This has the advantage of economical production, and the disadvantage of having to glue or stitch immediately before packaging. The double walls deliver a high load capacity.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – without tools

0303 – Telescope-type boxes with oblique slit-score lines

This slotted box has a high lid that it is glued in production; this offers rapid completion during packaging. It has the disadvantage of the need for die-cut tools.

  • Erection – manual / machine
  • Jointing – gluing / stitching
  • Manufacturing – with tools

0306 – Telescope-type box with 4-point glued base and lid

A box design with a different height of lid. It has the disadvantage of having to apply glue prior to erection. Package load capacity is provided only by the base.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – without tools

0307 – Telescope-type box, folded

A telescope-type box with a tall lid, and side walls with inserting locks. This design has the benefit of not needing gluing or stitching.

  • Erection – manual
  • Jointing – locking
  • Manufacturing – with tools

0308 – Telescope-type box

Telescope-type box with a tall lid, outside folds with oblique slit-score lines, concealed oblique slit-score lines, and 2x four-point gluing. This design has an advantage of quick erection during packaging.

  • Erection – manual
  • Jointing – gluing
  • Manufacturing – with tools

0310 – Telescope-type box

This consists of the body, a short folded base and lid; the base and lid are not in contact (the base and lid may be produced as folding parts as per, for example, 0303 or 0304). This design is suitable for pallet boxes as the thick fibreboard provides the body with the required load capacity.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – without tools

0312 – Telescope-type box

Another design suitable for pallet boxes. The lower part is made from thick fibreboard like FEFCO style 0200 and may be fastened to a wood pallet. The package is covered with a lid which, therefore, may be made from thinner fibreboard.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – without tools

0320 – Telescope-type box

Designed as a telescopic box consisting of two folded parts (as per 0200). Its advantage is its variable height for self-supported products or a double wall, if the upper part is slid fully to the bottom. The lower box may be attached to a wood pallet.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – without tools

0350 – Telescope-type box, Octabin

The Octabin consists of a low bottom and lid and an octagonal body, with connecting folds on four sides; the other sides are attached at the bottom.

  • Erection – manual
  • Jointing – gluing / stitching
  • Manufacturing – with tools
PILOUS spol. s r.o.
Náměstí Winstona Churchilla 1800/2
CZ - 130 00 Praha 3

email: info@pilous-packaging.com
V letech 2012 až 2014 probíhá v naší společnosti projekt Inovace interního informačního systému Pilous podpořený z OPPI ICT.

Copyright (c) 2011. Všechna práva vyhrazena. Pilous spol s.r.o.